diff --git a/arch/Kconfig b/arch/Kconfig
index d9afe26..2f3d07c 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -61,6 +61,7 @@
 
 config RISCV
 	bool "RISC-V architecture"
+	select CREATE_ARCH_SYMLINK
 	select SUPPORT_OF_CONTROL
 	select OF_CONTROL
 	select DM
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index c45e4d7..36512a8 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -14,15 +14,19 @@
 config TARGET_QEMU_VIRT
 	bool "Support QEMU Virt Board"
 
+config TARGET_SIFIVE_FU540
+	bool "Support SiFive FU540 Board"
+
 endchoice
 
 # board-specific options below
 source "board/AndesTech/ax25-ae350/Kconfig"
 source "board/emulation/qemu-riscv/Kconfig"
+source "board/sifive/fu540/Kconfig"
 
 # platform-specific options below
 source "arch/riscv/cpu/ax25/Kconfig"
-source "arch/riscv/cpu/qemu/Kconfig"
+source "arch/riscv/cpu/generic/Kconfig"
 
 # architecture-specific options below
 
diff --git a/arch/riscv/cpu/qemu/Kconfig b/arch/riscv/cpu/generic/Kconfig
similarity index 91%
rename from arch/riscv/cpu/qemu/Kconfig
rename to arch/riscv/cpu/generic/Kconfig
index f48751e..1d6ab50 100644
--- a/arch/riscv/cpu/qemu/Kconfig
+++ b/arch/riscv/cpu/generic/Kconfig
@@ -2,7 +2,7 @@
 #
 # Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
 
-config QEMU_RISCV
+config GENERIC_RISCV
 	bool
 	select ARCH_EARLY_INIT_R
 	imply CPU
diff --git a/arch/riscv/cpu/qemu/Makefile b/arch/riscv/cpu/generic/Makefile
similarity index 100%
rename from arch/riscv/cpu/qemu/Makefile
rename to arch/riscv/cpu/generic/Makefile
diff --git a/arch/riscv/cpu/qemu/cpu.c b/arch/riscv/cpu/generic/cpu.c
similarity index 100%
rename from arch/riscv/cpu/qemu/cpu.c
rename to arch/riscv/cpu/generic/cpu.c
diff --git a/arch/riscv/cpu/generic/dram.c b/arch/riscv/cpu/generic/dram.c
new file mode 100644
index 0000000..b7b1207
--- /dev/null
+++ b/arch/riscv/cpu/generic/dram.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+#ifdef CONFIG_64BIT
+	/*
+	 * Ensure that we run from first 4GB so that all
+	 * addresses used by U-Boot are 32bit addresses.
+	 *
+	 * This in-turn ensures that 32bit DMA capable
+	 * devices work fine because DMA mapping APIs will
+	 * provide 32bit DMA addresses only.
+	 */
+	if (gd->ram_top > SZ_4G)
+		return SZ_4G;
+#endif
+	return gd->ram_top;
+}
diff --git a/arch/riscv/cpu/qemu/dram.c b/arch/riscv/cpu/qemu/dram.c
deleted file mode 100644
index 84d87d2..0000000
--- a/arch/riscv/cpu/qemu/dram.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
- */
-
-#include <common.h>
-#include <fdtdec.h>
-
-int dram_init(void)
-{
-	return fdtdec_setup_mem_size_base();
-}
-
-int dram_init_banksize(void)
-{
-	return fdtdec_setup_memory_banksize();
-}
diff --git a/arch/riscv/include/asm/arch-generic/clk.h b/arch/riscv/include/asm/arch-generic/clk.h
new file mode 100644
index 0000000..1631f5f
--- /dev/null
+++ b/arch/riscv/include/asm/arch-generic/clk.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ *   Anup Patel <anup.patel@wdc.com>
+ */
+
+#ifndef __ASM_RISCV_ARCH_CLK_H
+#define __ASM_RISCV_ARCH_CLK_H
+
+/* Note: This is a placeholder header for driver compilation. */
+
+#endif
diff --git a/arch/riscv/include/asm/config.h b/arch/riscv/include/asm/config.h
index 81bc975..156cb94 100644
--- a/arch/riscv/include/asm/config.h
+++ b/arch/riscv/include/asm/config.h
@@ -8,5 +8,6 @@
 #define _ASM_CONFIG_H_
 
 #define CONFIG_LMB
+#define CONFIG_SYS_BOOT_RAMDISK_HIGH
 
 #endif
diff --git a/arch/riscv/include/asm/dma-mapping.h b/arch/riscv/include/asm/dma-mapping.h
new file mode 100644
index 0000000..3d930c9
--- /dev/null
+++ b/arch/riscv/include/asm/dma-mapping.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2018 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ *   Anup Patel <anup.patel@wdc.com>
+ */
+
+#ifndef __ASM_RISCV_DMA_MAPPING_H
+#define __ASM_RISCV_DMA_MAPPING_H
+
+#include <linux/dma-direction.h>
+
+#define dma_mapping_error(x, y)	0
+
+static inline void *dma_alloc_coherent(size_t len, unsigned long *handle)
+{
+	*handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len);
+	return (void *)*handle;
+}
+
+static inline void dma_free_coherent(void *addr)
+{
+	free(addr);
+}
+
+static inline unsigned long dma_map_single(volatile void *vaddr, size_t len,
+					   enum dma_data_direction dir)
+{
+	return (unsigned long)vaddr;
+}
+
+static inline void dma_unmap_single(volatile void *vaddr, size_t len,
+				    unsigned long paddr)
+{
+}
+
+#endif /* __ASM_RISCV_DMA_MAPPING_H */
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index d4c708c..87d8e5b 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -203,6 +203,14 @@
 			#clock-cells = <0>;
 			clock-frequency = <1234>;
 		};
+
+		clk_fixed_factor: clk-fixed-factor {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <2>;
+			clocks = <&clk_fixed>;
+		};
 	};
 
 	clk_sandbox: clk-sbox {
diff --git a/board/emulation/qemu-riscv/Kconfig b/board/emulation/qemu-riscv/Kconfig
index 0d865ac..88d07d5 100644
--- a/board/emulation/qemu-riscv/Kconfig
+++ b/board/emulation/qemu-riscv/Kconfig
@@ -7,7 +7,7 @@
 	default "emulation"
 
 config SYS_CPU
-	default "qemu"
+	default "generic"
 
 config SYS_CONFIG_NAME
 	default "qemu-riscv"
@@ -18,7 +18,7 @@
 
 config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
-	select QEMU_RISCV
+	select GENERIC_RISCV
 	imply SYS_NS16550
 	imply VIRTIO_MMIO
 	imply VIRTIO_NET
diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig
new file mode 100644
index 0000000..6be3d88
--- /dev/null
+++ b/board/sifive/fu540/Kconfig
@@ -0,0 +1,42 @@
+if TARGET_SIFIVE_FU540
+
+config SYS_BOARD
+	default "fu540"
+
+config SYS_VENDOR
+	default "sifive"
+
+config SYS_CPU
+	default "generic"
+
+config SYS_CONFIG_NAME
+	default "sifive-fu540"
+
+config SYS_TEXT_BASE
+	default 0x80000000 if !RISCV_SMODE
+	default 0x80200000 if RISCV_SMODE
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select GENERIC_RISCV
+	imply CMD_DHCP
+	imply CMD_EXT2
+	imply CMD_EXT4
+	imply CMD_FAT
+	imply CMD_FS_GENERIC
+	imply CMD_NET
+	imply CMD_PING
+	imply CLK_SIFIVE
+	imply CLK_SIFIVE_FU540_PRCI
+	imply DOS_PARTITION
+	imply EFI_PARTITION
+	imply IP_DYN
+	imply ISO_PARTITION
+	imply MACB
+	imply MII
+	imply NET_RANDOM_ETHADDR
+	imply PHY_LIB
+	imply PHY_MSCC
+	imply SIFIVE_SERIAL
+
+endif
diff --git a/board/sifive/fu540/MAINTAINERS b/board/sifive/fu540/MAINTAINERS
new file mode 100644
index 0000000..702d803
--- /dev/null
+++ b/board/sifive/fu540/MAINTAINERS
@@ -0,0 +1,9 @@
+SiFive FU540 BOARD
+M:	Paul Walmsley <paul.walmsley@sifive.com>
+M:	Palmer Dabbelt <palmer@sifive.com>
+M:	Anup Patel <anup.patel@wdc.com>
+M:	Atish Patra <atish.patra@wdc.com>
+S:	Maintained
+F:	board/sifive/fu540/
+F:	include/configs/sifive-fu540.h
+F:	configs/sifive_fu540_defconfig
diff --git a/board/sifive/fu540/Makefile b/board/sifive/fu540/Makefile
new file mode 100644
index 0000000..6e1862c
--- /dev/null
+++ b/board/sifive/fu540/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2019 Western Digital Corporation or its affiliates.
+
+obj-y	+= fu540.o
diff --git a/board/sifive/fu540/fu540.c b/board/sifive/fu540/fu540.c
new file mode 100644
index 0000000..5adc4a3
--- /dev/null
+++ b/board/sifive/fu540/fu540.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ *   Anup Patel <anup.patel@wdc.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+
+int board_init(void)
+{
+	/* For now nothing to do here. */
+
+	return 0;
+}
diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig
new file mode 100644
index 0000000..2f8cca9
--- /dev/null
+++ b/configs/sifive_fu540_defconfig
@@ -0,0 +1,11 @@
+CONFIG_RISCV=y
+CONFIG_TARGET_SIFIVE_FU540=y
+CONFIG_RISCV_SMODE=y
+CONFIG_ARCH_RV64I=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+CONFIG_CMD_MII=y
+CONFIG_OF_PRIOR_STAGE=y
diff --git a/doc/README.sifive-fu540 b/doc/README.sifive-fu540
new file mode 100644
index 0000000..fd9f2a8
--- /dev/null
+++ b/doc/README.sifive-fu540
@@ -0,0 +1,303 @@
+FU540-C000 RISC-V SoC
+=====================
+The FU540-C000 is the world’s first 4+1 64-bit RISC‑V SoC from SiFive.
+
+The HiFive Unleashed development platform is based on FU540-C000 and capable
+of running Linux.
+
+Mainline support
+================
+The support for following drivers are already enabled:
+1. SiFive UART Driver.
+2. SiFive PRCI Driver for clock.
+3. Cadence MACB ethernet driver for networking support.
+
+TODO:
+1. SPI driver is still missing. So MMC card can't be used in U-Boot as of now.
+2. U-Boot expects the serial console device entry to be present under /chosen
+   DT node. Example:
+   chosen {
+        stdout-path = "/soc/serial@10010000:115200";
+   };
+
+   Without a serial console U-Boot will panic.
+
+Building
+========
+1. Add the RISC-V toolchain to your PATH.
+2. Setup ARCH & cross compilation enviornment variable.
+   a. export ARCH=riscv
+   b. export CROSS_COMPILE=<riscv64 toolchain prefix>
+3. make sifive_fu540_defconfig
+4. make
+
+Flashing
+========
+The current U-Boot port is supported in S-mode only and loaded from DRAM.
+
+A prior stage (M-mode) firmware/bootloader (e.g OpenSBI or BBL) is required to
+load the u-boot.bin into memory and provide runtime services. The u-boot.bin
+can be given as a payload to the prior stage (M-mode) firmware/bootloader.
+
+The description of steps required to build the firmware is beyond the scope of
+this document. Please refer OpenSBI or BBL documenation.
+(Note: OpenSBI git repo is at https://github.com/riscv/opensbi.git)
+(Note: BBL git repo is at https://github.com/riscv/riscv-pk.git)
+
+Once the prior stage firmware/bootloader binary is generated, it should be
+copied to the first partition of the sdcard.
+
+sudo dd if=<prior_stage_firmware_binary> of=/dev/disk2s1 bs=1024
+
+Booting
+=======
+Once you plugin the sdcard and power up, you should see the U-Boot prompt.
+
+Sample boot log from HiFive Unleashed board
+===========================================
+U-Boot 2019.01-00019-gc7953536-dirty (Jan 22 2019 - 11:05:40 -0800)
+
+CPU:   rv64imafdc
+Model: sifive,hifive-unleashed-a00
+DRAM:  8 GiB
+In:    serial@10010000
+Out:   serial@10010000
+Err:   serial@10010000
+Net:
+Warning: ethernet@10090000 (eth0) using random MAC address - b6:75:4d:48:50:94
+eth0: ethernet@10090000
+Hit any key to stop autoboot:  0
+=> version
+U-Boot 2019.01-00019-gc7953536-dirty (Jan 22 2019 - 11:05:40 -0800)
+
+riscv64-linux-gcc.br_real (Buildroot 2018.11-rc2-00003-ga0787e9) 8.2.0
+GNU ld (GNU Binutils) 2.31.1
+=>
+===============================================================================
+
+Now you can configure your networking, tftp server and use tftp boot method to
+load uImage.
+
+==========================================================================
+=> setenv ethaddr 70:B3:D5:92:F0:C2
+=> setenv ipaddr 10.196.157.189
+=> setenv serverip 10.11.143.218
+=> setenv gatewayip 10.196.156.1
+=> setenv netmask 255.255.252.0
+=> bdinfo
+boot_params = 0x0000000000000000
+DRAM bank   = 0x0000000000000000
+-> start    = 0x0000000080000000
+-> size     = 0x0000000200000000
+relocaddr   = 0x00000000fff90000
+reloc off   = 0x000000007fd90000
+ethaddr     = 70:B3:D5:92:F0:C2
+IP addr     = 10.196.157.189
+baudrate    = 115200 bps
+=> tftpboot uImage
+ethernet@10090000: PHY present at 0
+ethernet@10090000: Starting autonegotiation...
+ethernet@10090000: Autonegotiation complete
+ethernet@10090000: link up, 1000Mbps full-duplex (lpa: 0x3800)
+Using ethernet@10090000 device
+TFTP from server 10.11.143.218; our IP address is 10.196.157.189; sending through gateway 10.196.156.1
+Filename 'uImage'.
+Load address: 0x80200000
+Loading: #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         ##########################################################
+         2.5 MiB/s
+done
+Bytes transferred = 14939132 (e3f3fc hex)
+=> bootm 0x80200000 - 0x82200000
+## Booting kernel from Legacy Image at 80200000 ...
+   Image Name:   Linux
+   Image Type:   RISC-V Linux Kernel Image (uncompressed)
+   Data Size:    14939068 Bytes = 14.2 MiB
+   Load Address: 80200000
+   Entry Point:  80200000
+   Verifying Checksum ... OK
+## Flattened Device Tree blob at 82200000
+   Booting using the fdt blob at 0x82200000
+   Loading Kernel Image ... OK
+   Using Device Tree in place at 0000000082200000, end 0000000082205c69
+
+Starting kernel ...
+
+[    0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
+[    0.000000] Linux version 5.0.0-rc1-00020-g4b51f736 (atish@jedi-01) (gcc version 7.2.0 (GCC)) #262 SMP Mon Jan 21 17:39:27 PST 2019
+[    0.000000] initrd not found or empty - disabling initrd
+[    0.000000] Zone ranges:
+[    0.000000]   DMA32    [mem 0x0000000080200000-0x00000000ffffffff]
+[    0.000000]   Normal   [mem 0x0000000100000000-0x000027ffffffffff]
+[    0.000000] Movable zone start for each node
+[    0.000000] Early memory node ranges
+[    0.000000]   node   0: [mem 0x0000000080200000-0x000000027fffffff]
+[    0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff]
+[    0.000000] software IO TLB: mapped [mem 0xfbfff000-0xfffff000] (64MB)
+[    0.000000] CPU with hartid=0 has a non-okay status of "masked"
+[    0.000000] CPU with hartid=0 has a non-okay status of "masked"
+[    0.000000] elf_hwcap is 0x112d
+[    0.000000] percpu: Embedded 15 pages/cpu @(____ptrval____) s29720 r0 d31720 u61440
+[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2067975
+[    0.000000] Kernel command line: earlyprintk
+[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
+[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
+[    0.000000] Sorting __ex_table...
+[    0.000000] Memory: 8178760K/8386560K available (3309K kernel code, 248K rwdata, 872K rodata, 9381K init, 763K bss, 207800K reserved, 0K cma-reserved)
+[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+[    0.000000] rcu: Hierarchical RCU implementation.
+[    0.000000] rcu:     RCU event tracing is enabled.
+[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
+[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
+[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+[    0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
+[    0.000000] plic: mapped 53 interrupts to 4 (out of 9) handlers.
+[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
+[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
+[    0.000008] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
+[    0.000221] Console: colour dummy device 80x25
+[    0.000902] printk: console [tty0] enabled
+[    0.000963] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
+[    0.001034] pid_max: default: 32768 minimum: 301
+[    0.001541] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
+[    0.001912] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
+[    0.003542] rcu: Hierarchical SRCU implementation.
+[    0.004347] smp: Bringing up secondary CPUs ...
+[    1.040259] CPU1: failed to come online
+[    2.080483] CPU2: failed to come online
+[    3.120699] CPU3: failed to come online
+[    3.120765] smp: Brought up 1 node, 1 CPU
+[    3.121923] devtmpfs: initialized
+[    3.124649] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+[    3.124727] futex hash table entries: 1024 (order: 4, 65536 bytes)
+[    3.125346] random: get_random_u32 called from bucket_table_alloc+0x72/0x172 with crng_init=0
+[    3.125578] NET: Registered protocol family 16
+[    3.126400] sifive-u54-prci 10000000.prci: Registered U54 core clocks
+[    3.126649] sifive-gemgxl-mgmt 100a0000.cadence-gemgxl-mgmt: Registered clock switch 'cadence-gemgxl-mgmt'
+[    3.135572] vgaarb: loaded
+[    3.135858] SCSI subsystem initialized
+[    3.136193] usbcore: registered new interface driver usbfs
+[    3.136266] usbcore: registered new interface driver hub
+[    3.136348] usbcore: registered new device driver usb
+[    3.136446] pps_core: LinuxPPS API ver. 1 registered
+[    3.136484] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+[    3.136575] PTP clock support registered
+[    3.137256] clocksource: Switched to clocksource riscv_clocksource
+[    3.142711] NET: Registered protocol family 2
+[    3.143322] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
+[    3.143634] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
+[    3.145799] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
+[    3.149121] TCP: Hash tables configured (established 65536 bind 65536)
+[    3.149591] UDP hash table entries: 4096 (order: 5, 131072 bytes)
+[    3.150094] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
+[    3.150781] NET: Registered protocol family 1
+[    3.230693] workingset: timestamp_bits=62 max_order=21 bucket_order=0
+[    3.241224] io scheduler mq-deadline registered
+[    3.241269] io scheduler kyber registered
+[    3.242143] sifive_gpio 10060000.gpio: SiFive GPIO chip registered 16 GPIOs
+[    3.242357] pwm-sifivem 10020000.pwm: Unable to find controller clock
+[    3.242439] pwm-sifivem 10021000.pwm: Unable to find controller clock
+[    3.243228] xilinx-pcie 2000000000.pci: PCIe Link is DOWN
+[    3.243289] xilinx-pcie 2000000000.pci: host bridge /soc/pci@2000000000 ranges:
+[    3.243360] xilinx-pcie 2000000000.pci:   No bus range found for /soc/pci@2000000000, using [bus 00-ff]
+[    3.243447] xilinx-pcie 2000000000.pci:   MEM 0x40000000..0x5fffffff -> 0x40000000
+[    3.243591] xilinx-pcie 2000000000.pci: PCI host bridge to bus 0000:00
+[    3.243636] pci_bus 0000:00: root bus resource [bus 00-ff]
+[    3.243676] pci_bus 0000:00: root bus resource [mem 0x40000000-0x5fffffff]
+[    3.276547] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+[    3.277689] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 39, base_baud = 0) is a SiFive UART v0
+[    3.786963] printk: console [ttySIF0] enabled
+[    3.791504] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 40, base_baud = 0) is a SiFive UART v0
+[    3.801251] sifive_spi 10040000.spi: mapped; irq=41, cs=1
+[    3.806362] m25p80 spi0.0: unrecognized JEDEC id bytes: 9d, 70, 19
+[    3.812084] m25p80: probe of spi0.0 failed with error -2
+[    3.817453] sifive_spi 10041000.spi: mapped; irq=42, cs=4
+[    3.823027] sifive_spi 10050000.spi: mapped; irq=43, cs=1
+[    3.828604] libphy: Fixed MDIO Bus: probed
+[    3.832623] macb: GEM doesn't support hardware ptp.
+[    3.837196] libphy: MACB_mii_bus: probed
+[    4.041156] Microsemi VSC8541 SyncE 10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL)
+[    4.055779] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 12 (70:b3:d5:92:f0:c2)
+[    4.065780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[    4.072033] ehci-pci: EHCI PCI platform driver
+[    4.076521] usbcore: registered new interface driver usb-storage
+[    4.082843] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
+[    4.127465] mmc_spi spi2.0: SD/MMC host mmc0, no DMA, no WP, no poweroff
+[    4.133645] usbcore: registered new interface driver usbhid
+[    4.138980] usbhid: USB HID core driver
+[    4.143017] NET: Registered protocol family 17
+[    4.147885] pwm-sifivem 10020000.pwm: SiFive PWM chip registered 4 PWMs
+[    4.153945] pwm-sifivem 10021000.pwm: SiFive PWM chip registered 4 PWMs
+[    4.186407] Freeing unused kernel memory: 9380K
+[    4.190224] This architecture does not have kernel memory protection.
+[    4.196609] Run /init as init process
+Starting logging: OK
+Starting mdev...
+[    4.303785] mmc0: host does not support reading read-only switch, assuming write-enable
+[    4.311109] mmc0: new SDHC card on SPI
+[    4.317103] mmcblk0: mmc0:0000 SS08G 7.40 GiB
+[    4.386471]  mmcblk0: p1 p2
+sort: /sys/devices/platform/Fixed: No such file or directory
+modprobe: can't change directory to '/lib/modules': No such file or directory
+Initializing random[    4.759075] random: dd: uninitialized urandom read (512 bytes read)
+ number generator... done.
+Starting network...
+udhcpc (v1.24.2) started
+Sending discover...
+Sending discover...
+[    7.927510] macb 10090000.ethernet eth0: link up (1000/Full)
+Sending discover...
+Sending select for 10.196.157.190...
+Lease of 10.196.157.190 obtained, lease time 499743
+deleting routers
+adding dns 10.86.1.1
+adding dns 10.86.2.1
+/etc/init.d/S50dropbear
+Starting dropbear sshd: [   12.772393] random: dropbear: uninitialized urandom read (32 bytes read)
+OK
+
+Welcome to Buildroot
+buildroot login:
diff --git a/doc/device-tree-bindings/clock/fixed-factor-clock.txt b/doc/device-tree-bindings/clock/fixed-factor-clock.txt
new file mode 100644
index 0000000..1bae852
--- /dev/null
+++ b/doc/device-tree-bindings/clock/fixed-factor-clock.txt
@@ -0,0 +1,24 @@
+Binding for simple fixed factor rate clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-div: fixed divider.
+- clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	clock {
+		compatible = "fixed-factor-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 51c931b..ff60fc5 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -105,6 +105,7 @@
 source "drivers/clk/owl/Kconfig"
 source "drivers/clk/renesas/Kconfig"
 source "drivers/clk/sunxi/Kconfig"
+source "drivers/clk/sifive/Kconfig"
 source "drivers/clk/tegra/Kconfig"
 source "drivers/clk/uniphier/Kconfig"
 
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 6a4ff91..1d9d725 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -4,7 +4,9 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 
-obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o clk_fixed_rate.o
+obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o
+obj-$(CONFIG_$(SPL_TPL_)CLK) += clk_fixed_rate.o
+obj-$(CONFIG_$(SPL_TPL_)CLK) += clk_fixed_factor.o
 
 obj-y += imx/
 obj-y += tegra/
@@ -22,6 +24,7 @@
 obj-$(CONFIG_CLK_MPC83XX) += mpc83xx_clk.o
 obj-$(CONFIG_CLK_OWL) += owl/
 obj-$(CONFIG_CLK_RENESAS) += renesas/
+obj-$(CONFIG_CLK_SIFIVE) += sifive/
 obj-$(CONFIG_ARCH_SUNXI) += sunxi/
 obj-$(CONFIG_CLK_STM32F) += clk_stm32f.o
 obj-$(CONFIG_CLK_STM32MP1) += clk_stm32mp1.o
diff --git a/drivers/clk/clk_fixed_factor.c b/drivers/clk/clk_fixed_factor.c
new file mode 100644
index 0000000..5fa20a8
--- /dev/null
+++ b/drivers/clk/clk_fixed_factor.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Author: Anup Patel <anup.patel@wdc.com>
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <div64.h>
+#include <dm.h>
+
+struct clk_fixed_factor {
+	struct clk parent;
+	unsigned int div;
+	unsigned int mult;
+};
+
+#define to_clk_fixed_factor(dev)	\
+	((struct clk_fixed_factor *)dev_get_platdata(dev))
+
+static ulong clk_fixed_factor_get_rate(struct clk *clk)
+{
+	uint64_t rate;
+	struct clk_fixed_factor *ff = to_clk_fixed_factor(clk->dev);
+
+	if (clk->id != 0)
+		return -EINVAL;
+
+	rate = clk_get_rate(&ff->parent);
+	if (IS_ERR_VALUE(rate))
+		return rate;
+
+	do_div(rate, ff->div);
+
+	return rate * ff->mult;
+}
+
+const struct clk_ops clk_fixed_factor_ops = {
+	.get_rate = clk_fixed_factor_get_rate,
+};
+
+static int clk_fixed_factor_ofdata_to_platdata(struct udevice *dev)
+{
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	int err;
+	struct clk_fixed_factor *ff = to_clk_fixed_factor(dev);
+
+	err = clk_get_by_index(dev, 0, &ff->parent);
+	if (err)
+		return err;
+
+	ff->div = dev_read_u32_default(dev, "clock-div", 1);
+	ff->mult = dev_read_u32_default(dev, "clock-mult", 1);
+#endif
+
+	return 0;
+}
+
+static const struct udevice_id clk_fixed_factor_match[] = {
+	{
+		.compatible = "fixed-factor-clock",
+	},
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(clk_fixed_factor) = {
+	.name = "fixed_factor_clock",
+	.id = UCLASS_CLK,
+	.of_match = clk_fixed_factor_match,
+	.ofdata_to_platdata = clk_fixed_factor_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct clk_fixed_factor),
+	.ops = &clk_fixed_factor_ops,
+};
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
new file mode 100644
index 0000000..81fc9f8
--- /dev/null
+++ b/drivers/clk/sifive/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config CLK_ANALOGBITS_WRPLL_CLN28HPC
+	bool
+
+config CLK_SIFIVE
+	bool "SiFive SoC driver support"
+	depends on CLK
+	help
+	  SoC drivers for SiFive Linux-capable SoCs.
+
+config CLK_SIFIVE_FU540_PRCI
+	bool "PRCI driver for SiFive FU540 SoCs"
+	depends on CLK_SIFIVE
+	select CLK_ANALOGBITS_WRPLL_CLN28HPC
+	help
+	  Supports the Power Reset Clock interface (PRCI) IP block found in
+	  FU540 SoCs.  If this kernel is meant to run on a SiFive FU540 SoC,
+	  enable this driver.
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
new file mode 100644
index 0000000..1155e07
--- /dev/null
+++ b/drivers/clk/sifive/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_CLK_ANALOGBITS_WRPLL_CLN28HPC)	+= wrpll-cln28hpc.o
+
+obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI)		+= fu540-prci.o
diff --git a/drivers/clk/sifive/analogbits-wrpll-cln28hpc.h b/drivers/clk/sifive/analogbits-wrpll-cln28hpc.h
new file mode 100644
index 0000000..4432e24
--- /dev/null
+++ b/drivers/clk/sifive/analogbits-wrpll-cln28hpc.h
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Copyright (C) 2018 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
+#define __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
+
+#include <linux/types.h>
+
+/* DIVQ_VALUES: number of valid DIVQ values */
+#define DIVQ_VALUES				6
+
+/*
+ * Bit definitions for struct analogbits_wrpll_cfg.flags
+ *
+ * WRPLL_FLAGS_BYPASS_FLAG: if set, the PLL is either in bypass, or should be
+ *	programmed to enter bypass
+ * WRPLL_FLAGS_RESET_FLAG: if set, the PLL is in reset
+ * WRPLL_FLAGS_INT_FEEDBACK_FLAG: if set, the PLL is configured for internal
+ *	feedback mode
+ * WRPLL_FLAGS_EXT_FEEDBACK_FLAG: if set, the PLL is configured for external
+ *	feedback mode (not yet supported by this driver)
+ *
+ * The flags WRPLL_FLAGS_INT_FEEDBACK_FLAG and WRPLL_FLAGS_EXT_FEEDBACK_FLAG are
+ * mutually exclusive.  If both bits are set, or both are zero, the struct
+ * analogbits_wrpll_cfg record is uninitialized or corrupt.
+ */
+#define WRPLL_FLAGS_BYPASS_SHIFT		0
+#define WRPLL_FLAGS_BYPASS_MASK		BIT(WRPLL_FLAGS_BYPASS_SHIFT)
+#define WRPLL_FLAGS_RESET_SHIFT		1
+#define WRPLL_FLAGS_RESET_MASK		BIT(WRPLL_FLAGS_RESET_SHIFT)
+#define WRPLL_FLAGS_INT_FEEDBACK_SHIFT	2
+#define WRPLL_FLAGS_INT_FEEDBACK_MASK	BIT(WRPLL_FLAGS_INT_FEEDBACK_SHIFT)
+#define WRPLL_FLAGS_EXT_FEEDBACK_SHIFT	3
+#define WRPLL_FLAGS_EXT_FEEDBACK_MASK	BIT(WRPLL_FLAGS_EXT_FEEDBACK_SHIFT)
+
+/**
+ * struct analogbits_wrpll_cfg - WRPLL configuration values
+ * @divr: reference divider value (6 bits), as presented to the PLL signals.
+ * @divf: feedback divider value (9 bits), as presented to the PLL signals.
+ * @divq: output divider value (3 bits), as presented to the PLL signals.
+ * @flags: PLL configuration flags.  See above for more information.
+ * @range: PLL loop filter range.  See below for more information.
+ * @_output_rate_cache: cached output rates, swept across DIVQ.
+ * @_parent_rate: PLL refclk rate for which values are valid
+ * @_max_r: maximum possible R divider value, given @parent_rate
+ * @_init_r: initial R divider value to start the search from
+ *
+ * @divr, @divq, @divq, @range represent what the PLL expects to see
+ * on its input signals.  Thus @divr and @divf are the actual divisors
+ * minus one.  @divq is a power-of-two divider; for example, 1 =
+ * divide-by-2 and 6 = divide-by-64.  0 is an invalid @divq value.
+ *
+ * When initially passing a struct analogbits_wrpll_cfg record, the
+ * record should be zero-initialized with the exception of the @flags
+ * field.  The only flag bits that need to be set are either
+ * WRPLL_FLAGS_INT_FEEDBACK or WRPLL_FLAGS_EXT_FEEDBACK.
+ *
+ * Field names beginning with an underscore should be considered
+ * private to the wrpll-cln28hpc.c code.
+ */
+struct analogbits_wrpll_cfg {
+	u8 divr;
+	u8 divq;
+	u8 range;
+	u8 flags;
+	u16 divf;
+	u32 _output_rate_cache[DIVQ_VALUES];
+	unsigned long _parent_rate;
+	u8 _max_r;
+	u8 _init_r;
+};
+
+/*
+ * Function prototypes
+ */
+
+int analogbits_wrpll_configure_for_rate(struct analogbits_wrpll_cfg *c,
+					u32 target_rate,
+					unsigned long parent_rate);
+
+unsigned int analogbits_wrpll_calc_max_lock_us(struct analogbits_wrpll_cfg *c);
+
+unsigned long analogbits_wrpll_calc_output_rate(struct analogbits_wrpll_cfg *c,
+						unsigned long parent_rate);
+
+#endif /* __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H */
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
new file mode 100644
index 0000000..e1b5f8e
--- /dev/null
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -0,0 +1,604 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Copyright (C) 2018 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * The FU540 PRCI implements clock and reset control for the SiFive
+ * FU540-C000 chip.   This driver assumes that it has sole control
+ * over all PRCI resources.
+ *
+ * This driver is based on the PRCI driver written by Wesley Terpstra.
+ *
+ * Refer, commit 999529edf517ed75b56659d456d221b2ee56bb60 of:
+ * https://github.com/riscv/riscv-linux
+ *
+ * References:
+ * - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
+ */
+
+#include <asm/io.h>
+#include <clk-uclass.h>
+#include <clk.h>
+#include <common.h>
+#include <div64.h>
+#include <dm.h>
+#include <errno.h>
+
+#include <linux/math64.h>
+#include <dt-bindings/clk/sifive-fu540-prci.h>
+
+#include "analogbits-wrpll-cln28hpc.h"
+
+/*
+ * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
+ *     hfclk and rtcclk
+ */
+#define EXPECTED_CLK_PARENT_COUNT	2
+
+/*
+ * Register offsets and bitmasks
+ */
+
+/* COREPLLCFG0 */
+#define PRCI_COREPLLCFG0_OFFSET		0x4
+#define PRCI_COREPLLCFG0_DIVR_SHIFT	0
+#define PRCI_COREPLLCFG0_DIVR_MASK	(0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
+#define PRCI_COREPLLCFG0_DIVF_SHIFT	6
+#define PRCI_COREPLLCFG0_DIVF_MASK	(0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
+#define PRCI_COREPLLCFG0_DIVQ_SHIFT	15
+#define PRCI_COREPLLCFG0_DIVQ_MASK	(0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
+#define PRCI_COREPLLCFG0_RANGE_SHIFT	18
+#define PRCI_COREPLLCFG0_RANGE_MASK	(0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
+#define PRCI_COREPLLCFG0_BYPASS_SHIFT	24
+#define PRCI_COREPLLCFG0_BYPASS_MASK	(0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
+#define PRCI_COREPLLCFG0_FSE_SHIFT	25
+#define PRCI_COREPLLCFG0_FSE_MASK	(0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
+#define PRCI_COREPLLCFG0_LOCK_SHIFT	31
+#define PRCI_COREPLLCFG0_LOCK_MASK	(0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG0 */
+#define PRCI_DDRPLLCFG0_OFFSET		0xc
+#define PRCI_DDRPLLCFG0_DIVR_SHIFT	0
+#define PRCI_DDRPLLCFG0_DIVR_MASK	(0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVF_SHIFT	6
+#define PRCI_DDRPLLCFG0_DIVF_MASK	(0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVQ_SHIFT	15
+#define PRCI_DDRPLLCFG0_DIVQ_MASK	(0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
+#define PRCI_DDRPLLCFG0_RANGE_SHIFT	18
+#define PRCI_DDRPLLCFG0_RANGE_MASK	(0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
+#define PRCI_DDRPLLCFG0_BYPASS_SHIFT	24
+#define PRCI_DDRPLLCFG0_BYPASS_MASK	(0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
+#define PRCI_DDRPLLCFG0_FSE_SHIFT	25
+#define PRCI_DDRPLLCFG0_FSE_MASK	(0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
+#define PRCI_DDRPLLCFG0_LOCK_SHIFT	31
+#define PRCI_DDRPLLCFG0_LOCK_MASK	(0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG1 */
+#define PRCI_DDRPLLCFG1_OFFSET		0x10
+#define PRCI_DDRPLLCFG1_CKE_SHIFT	24
+#define PRCI_DDRPLLCFG1_CKE_MASK	(0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
+
+/* GEMGXLPLLCFG0 */
+#define PRCI_GEMGXLPLLCFG0_OFFSET	0x1c
+#define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT	0
+#define PRCI_GEMGXLPLLCFG0_DIVR_MASK	\
+			(0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT	6
+#define PRCI_GEMGXLPLLCFG0_DIVF_MASK	\
+			(0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT	15
+#define PRCI_GEMGXLPLLCFG0_DIVQ_MASK	(0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT	18
+#define PRCI_GEMGXLPLLCFG0_RANGE_MASK	\
+			(0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_GEMGXLPLLCFG0_BYPASS_MASK	\
+			(0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_FSE_SHIFT	25
+#define PRCI_GEMGXLPLLCFG0_FSE_MASK	\
+			(0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT	31
+#define PRCI_GEMGXLPLLCFG0_LOCK_MASK	(0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
+
+/* GEMGXLPLLCFG1 */
+#define PRCI_GEMGXLPLLCFG1_OFFSET	0x20
+#define PRCI_GEMGXLPLLCFG1_CKE_SHIFT	24
+#define PRCI_GEMGXLPLLCFG1_CKE_MASK	(0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
+
+/* CORECLKSEL */
+#define PRCI_CORECLKSEL_OFFSET		0x24
+#define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
+#define PRCI_CORECLKSEL_CORECLKSEL_MASK \
+			(0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
+
+/* DEVICESRESETREG */
+#define PRCI_DEVICESRESETREG_OFFSET	0x28
+#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0
+#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK \
+			(0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1
+#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK \
+			(0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2
+#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK \
+			(0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3
+#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK \
+			(0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5
+#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK \
+			(0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT)
+
+/* CLKMUXSTATUSREG */
+#define PRCI_CLKMUXSTATUSREG_OFFSET		0x2c
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
+			(0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
+
+/*
+ * Private structures
+ */
+
+/**
+ * struct __prci_data - per-device-instance data
+ * @va: base virtual address of the PRCI IP block
+ * @parent: parent clk instance
+ *
+ * PRCI per-device instance data
+ */
+struct __prci_data {
+	void *base;
+	struct clk parent;
+};
+
+/**
+ * struct __prci_wrpll_data - WRPLL configuration and integration data
+ * @c: WRPLL current configuration record
+ * @bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
+ * @no_bypass: fn ptr to code to not bypass the WRPLL (if applicable; else NULL)
+ * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
+ *
+ * @bypass and @no_bypass are used for WRPLL instances that contain a separate
+ * external glitchless clock mux downstream from the PLL.  The WRPLL internal
+ * bypass mux is not glitchless.
+ */
+struct __prci_wrpll_data {
+	struct analogbits_wrpll_cfg c;
+	void (*bypass)(struct __prci_data *pd);
+	void (*no_bypass)(struct __prci_data *pd);
+	u8 cfg0_offs;
+};
+
+struct __prci_clock;
+
+struct __prci_clock_ops {
+	int (*set_rate)(struct __prci_clock *pc,
+			unsigned long rate,
+			unsigned long parent_rate);
+	unsigned long (*round_rate)(struct __prci_clock *pc,
+				    unsigned long rate,
+				    unsigned long *parent_rate);
+	unsigned long (*recalc_rate)(struct __prci_clock *pc,
+				     unsigned long parent_rate);
+};
+
+/**
+ * struct __prci_clock - describes a clock device managed by PRCI
+ * @name: user-readable clock name string - should match the manual
+ * @parent_name: parent name for this clock
+ * @ops: struct clk_ops for the Linux clock framework to use for control
+ * @hw: Linux-private clock data
+ * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
+ * @pd: PRCI-specific data associated with this clock (if not NULL)
+ *
+ * PRCI clock data.  Used by the PRCI driver to register PRCI-provided
+ * clocks to the Linux clock infrastructure.
+ */
+struct __prci_clock {
+	const char *name;
+	const char *parent_name;
+	const struct __prci_clock_ops *ops;
+	struct __prci_wrpll_data *pwd;
+	struct __prci_data *pd;
+};
+
+/*
+ * Private functions
+ */
+
+/**
+ * __prci_readl() - read from a PRCI register
+ * @pd: PRCI context
+ * @offs: register offset to read from (in bytes, from PRCI base address)
+ *
+ * Read the register located at offset @offs from the base virtual
+ * address of the PRCI register target described by @pd, and return
+ * the value to the caller.
+ *
+ * Context: Any context.
+ *
+ * Return: the contents of the register described by @pd and @offs.
+ */
+static u32 __prci_readl(struct __prci_data *pd, u32 offs)
+{
+	return readl(pd->base + offs);
+}
+
+static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
+{
+	return writel(v, pd->base + offs);
+}
+
+/* WRPLL-related private functions */
+
+/**
+ * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters
+ * @c: ptr to a struct analogbits_wrpll_cfg record to write config into
+ * @r: value read from the PRCI PLL configuration register
+ *
+ * Given a value @r read from an FU540 PRCI PLL configuration register,
+ * split it into fields and populate it into the WRPLL configuration record
+ * pointed to by @c.
+ *
+ * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros
+ * have the same register layout.
+ *
+ * Context: Any context.
+ */
+static void __prci_wrpll_unpack(struct analogbits_wrpll_cfg *c, u32 r)
+{
+	u32 v;
+
+	v = r & PRCI_COREPLLCFG0_DIVR_MASK;
+	v >>= PRCI_COREPLLCFG0_DIVR_SHIFT;
+	c->divr = v;
+
+	v = r & PRCI_COREPLLCFG0_DIVF_MASK;
+	v >>= PRCI_COREPLLCFG0_DIVF_SHIFT;
+	c->divf = v;
+
+	v = r & PRCI_COREPLLCFG0_DIVQ_MASK;
+	v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT;
+	c->divq = v;
+
+	v = r & PRCI_COREPLLCFG0_RANGE_MASK;
+	v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
+	c->range = v;
+
+	c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK |
+		     WRPLL_FLAGS_EXT_FEEDBACK_MASK);
+
+	if (r & PRCI_COREPLLCFG0_FSE_MASK)
+		c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
+	else
+		c->flags |= WRPLL_FLAGS_EXT_FEEDBACK_MASK;
+}
+
+/**
+ * __prci_wrpll_pack() - pack PLL configuration parameters into a register value
+ * @c: pointer to a struct analogbits_wrpll_cfg record containing the PLL's cfg
+ *
+ * Using a set of WRPLL configuration values pointed to by @c,
+ * assemble a PRCI PLL configuration register value, and return it to
+ * the caller.
+ *
+ * Context: Any context.  Caller must ensure that the contents of the
+ *          record pointed to by @c do not change during the execution
+ *          of this function.
+ *
+ * Returns: a value suitable for writing into a PRCI PLL configuration
+ *          register
+ */
+static u32 __prci_wrpll_pack(struct analogbits_wrpll_cfg *c)
+{
+	u32 r = 0;
+
+	r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT;
+	r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT;
+	r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT;
+	r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT;
+	if (c->flags & WRPLL_FLAGS_INT_FEEDBACK_MASK)
+		r |= PRCI_COREPLLCFG0_FSE_MASK;
+
+	return r;
+}
+
+/**
+ * __prci_wrpll_read_cfg() - read the WRPLL configuration from the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ *
+ * Read the current configuration of the PLL identified by @pwd from
+ * the PRCI identified by @pd, and store it into the local configuration
+ * cache in @pwd.
+ *
+ * Context: Any context.  Caller must prevent the records pointed to by
+ *          @pd and @pwd from changing during execution.
+ */
+static void __prci_wrpll_read_cfg(struct __prci_data *pd,
+				  struct __prci_wrpll_data *pwd)
+{
+	__prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs));
+}
+
+/**
+ * __prci_wrpll_write_cfg() - write WRPLL configuration into the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ * @c: WRPLL configuration record to write
+ *
+ * Write the WRPLL configuration described by @c into the WRPLL
+ * configuration register identified by @pwd in the PRCI instance
+ * described by @c.  Make a cached copy of the WRPLL's current
+ * configuration so it can be used by other code.
+ *
+ * Context: Any context.  Caller must prevent the records pointed to by
+ *          @pd and @pwd from changing during execution.
+ */
+static void __prci_wrpll_write_cfg(struct __prci_data *pd,
+				   struct __prci_wrpll_data *pwd,
+				   struct analogbits_wrpll_cfg *c)
+{
+	__prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd);
+
+	memcpy(&pwd->c, c, sizeof(struct analogbits_wrpll_cfg));
+}
+
+/* Core clock mux control */
+
+/**
+ * __prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the HFCLK input source; return once complete.
+ *
+ * Context: Any context.  Caller must prevent concurrent changes to the
+ *          PRCI_CORECLKSEL_OFFSET register.
+ */
+static void __prci_coreclksel_use_hfclk(struct __prci_data *pd)
+{
+	u32 r;
+
+	r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+	r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
+	__prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+	r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+/**
+ * __prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the PLL output clock; return once complete.
+ *
+ * Context: Any context.  Caller must prevent concurrent changes to the
+ *          PRCI_CORECLKSEL_OFFSET register.
+ */
+static void __prci_coreclksel_use_corepll(struct __prci_data *pd)
+{
+	u32 r;
+
+	r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+	r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
+	__prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+	r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+static unsigned long sifive_fu540_prci_wrpll_recalc_rate(
+						struct __prci_clock *pc,
+						unsigned long parent_rate)
+{
+	struct __prci_wrpll_data *pwd = pc->pwd;
+
+	return analogbits_wrpll_calc_output_rate(&pwd->c, parent_rate);
+}
+
+static unsigned long sifive_fu540_prci_wrpll_round_rate(
+						struct __prci_clock *pc,
+						unsigned long rate,
+						unsigned long *parent_rate)
+{
+	struct __prci_wrpll_data *pwd = pc->pwd;
+	struct analogbits_wrpll_cfg c;
+
+	memcpy(&c, &pwd->c, sizeof(c));
+
+	analogbits_wrpll_configure_for_rate(&c, rate, *parent_rate);
+
+	return analogbits_wrpll_calc_output_rate(&c, *parent_rate);
+}
+
+static int sifive_fu540_prci_wrpll_set_rate(struct __prci_clock *pc,
+					    unsigned long rate,
+					    unsigned long parent_rate)
+{
+	struct __prci_wrpll_data *pwd = pc->pwd;
+	struct __prci_data *pd = pc->pd;
+	int r;
+
+	r = analogbits_wrpll_configure_for_rate(&pwd->c, rate, parent_rate);
+	if (r)
+		return -ERANGE;
+
+	if (pwd->bypass)
+		pwd->bypass(pd);
+
+	__prci_wrpll_write_cfg(pd, pwd, &pwd->c);
+
+	udelay(analogbits_wrpll_calc_max_lock_us(&pwd->c));
+
+	if (pwd->no_bypass)
+		pwd->no_bypass(pd);
+
+	return 0;
+}
+
+static const struct __prci_clock_ops sifive_fu540_prci_wrpll_clk_ops = {
+	.set_rate = sifive_fu540_prci_wrpll_set_rate,
+	.round_rate = sifive_fu540_prci_wrpll_round_rate,
+	.recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
+};
+
+static const struct __prci_clock_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
+	.recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
+};
+
+/* TLCLKSEL clock integration */
+
+static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(
+						struct __prci_clock *pc,
+						unsigned long parent_rate)
+{
+	struct __prci_data *pd = pc->pd;
+	u32 v;
+	u8 div;
+
+	v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET);
+	v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK;
+	div = v ? 1 : 2;
+
+	return div_u64(parent_rate, div);
+}
+
+static const struct __prci_clock_ops sifive_fu540_prci_tlclksel_clk_ops = {
+	.recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate,
+};
+
+/*
+ * PRCI integration data for each WRPLL instance
+ */
+
+static struct __prci_wrpll_data __prci_corepll_data = {
+	.cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+	.bypass = __prci_coreclksel_use_hfclk,
+	.no_bypass = __prci_coreclksel_use_corepll,
+};
+
+static struct __prci_wrpll_data __prci_ddrpll_data = {
+	.cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+};
+
+static struct __prci_wrpll_data __prci_gemgxlpll_data = {
+	.cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
+};
+
+/*
+ * List of clock controls provided by the PRCI
+ */
+
+static struct __prci_clock __prci_init_clocks[] = {
+	[PRCI_CLK_COREPLL] = {
+		.name = "corepll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu540_prci_wrpll_clk_ops,
+		.pwd = &__prci_corepll_data,
+	},
+	[PRCI_CLK_DDRPLL] = {
+		.name = "ddrpll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu540_prci_wrpll_ro_clk_ops,
+		.pwd = &__prci_ddrpll_data,
+	},
+	[PRCI_CLK_GEMGXLPLL] = {
+		.name = "gemgxlpll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu540_prci_wrpll_clk_ops,
+		.pwd = &__prci_gemgxlpll_data,
+	},
+	[PRCI_CLK_TLCLK] = {
+		.name = "tlclk",
+		.parent_name = "corepll",
+		.ops = &sifive_fu540_prci_tlclksel_clk_ops,
+	},
+};
+
+static ulong sifive_fu540_prci_get_rate(struct clk *clk)
+{
+	struct __prci_clock *pc;
+
+	if (ARRAY_SIZE(__prci_init_clocks) <= clk->id)
+		return -ENXIO;
+
+	pc = &__prci_init_clocks[clk->id];
+	if (!pc->pd || !pc->ops->recalc_rate)
+		return -ENXIO;
+
+	return pc->ops->recalc_rate(pc, clk_get_rate(&pc->pd->parent));
+}
+
+static ulong sifive_fu540_prci_set_rate(struct clk *clk, ulong rate)
+{
+	int err;
+	struct __prci_clock *pc;
+
+	if (ARRAY_SIZE(__prci_init_clocks) <= clk->id)
+		return -ENXIO;
+
+	pc = &__prci_init_clocks[clk->id];
+	if (!pc->pd || !pc->ops->set_rate)
+		return -ENXIO;
+
+	err = pc->ops->set_rate(pc, rate, clk_get_rate(&pc->pd->parent));
+	if (err)
+		return err;
+
+	return rate;
+}
+
+static int sifive_fu540_prci_probe(struct udevice *dev)
+{
+	int i, err;
+	struct __prci_clock *pc;
+	struct __prci_data *pd = dev_get_priv(dev);
+
+	pd->base = (void *)dev_read_addr(dev);
+	if (IS_ERR(pd->base))
+		return PTR_ERR(pd->base);
+
+	err = clk_get_by_index(dev, 0, &pd->parent);
+	if (err)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(__prci_init_clocks); ++i) {
+		pc = &__prci_init_clocks[i];
+		pc->pd = pd;
+		if (pc->pwd)
+			__prci_wrpll_read_cfg(pd, pc->pwd);
+	}
+
+	return 0;
+}
+
+static struct clk_ops sifive_fu540_prci_ops = {
+	.set_rate = sifive_fu540_prci_set_rate,
+	.get_rate = sifive_fu540_prci_get_rate,
+};
+
+static const struct udevice_id sifive_fu540_prci_ids[] = {
+	{ .compatible = "sifive,fu540-c000-prci0" },
+	{ .compatible = "sifive,aloeprci0" },
+	{ }
+};
+
+U_BOOT_DRIVER(sifive_fu540_prci) = {
+	.name = "sifive-fu540-prci",
+	.id = UCLASS_CLK,
+	.of_match = sifive_fu540_prci_ids,
+	.probe = sifive_fu540_prci_probe,
+	.ops = &sifive_fu540_prci_ops,
+	.priv_auto_alloc_size = sizeof(struct __prci_data),
+};
diff --git a/drivers/clk/sifive/wrpll-cln28hpc.c b/drivers/clk/sifive/wrpll-cln28hpc.c
new file mode 100644
index 0000000..d377849
--- /dev/null
+++ b/drivers/clk/sifive/wrpll-cln28hpc.c
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Copyright (C) 2018 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This library supports configuration parsing and reprogramming of
+ * the CLN28HPC variant of the Analog Bits Wide Range PLL.  The
+ * intention is for this library to be reusable for any device that
+ * integrates this PLL; thus the register structure and programming
+ * details are expected to be provided by a separate IP block driver.
+ *
+ * The bulk of this code is primarily useful for clock configurations
+ * that must operate at arbitrary rates, as opposed to clock configurations
+ * that are restricted by software or manufacturer guidance to a small,
+ * pre-determined set of performance points.
+ *
+ * References:
+ * - Analog Bits "Wide Range PLL Datasheet", version 2015.10.01
+ * - SiFive FU540-C000 Manual v1p0, Chapter 7 "Clocking and Reset"
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/log2.h>
+#include <linux/math64.h>
+
+#include "analogbits-wrpll-cln28hpc.h"
+
+/* MIN_INPUT_FREQ: minimum input clock frequency, in Hz (Fref_min) */
+#define MIN_INPUT_FREQ			7000000
+
+/* MAX_INPUT_FREQ: maximum input clock frequency, in Hz (Fref_max) */
+#define MAX_INPUT_FREQ			600000000
+
+/* MIN_POST_DIVIDE_REF_FREQ: minimum post-divider reference frequency, in Hz */
+#define MIN_POST_DIVR_FREQ		7000000
+
+/* MAX_POST_DIVIDE_REF_FREQ: maximum post-divider reference frequency, in Hz */
+#define MAX_POST_DIVR_FREQ		200000000
+
+/* MIN_VCO_FREQ: minimum VCO frequency, in Hz (Fvco_min) */
+#define MIN_VCO_FREQ			2400000000UL
+
+/* MAX_VCO_FREQ: maximum VCO frequency, in Hz (Fvco_max) */
+#define MAX_VCO_FREQ			4800000000ULL
+
+/* MAX_DIVQ_DIVISOR: maximum output divisor.  Selected by DIVQ = 6 */
+#define MAX_DIVQ_DIVISOR		64
+
+/* MAX_DIVR_DIVISOR: maximum reference divisor.  Selected by DIVR = 63 */
+#define MAX_DIVR_DIVISOR		64
+
+/* MAX_LOCK_US: maximum PLL lock time, in microseconds (tLOCK_max) */
+#define MAX_LOCK_US			70
+
+/*
+ * ROUND_SHIFT: number of bits to shift to avoid precision loss in the rounding
+ *              algorithm
+ */
+#define ROUND_SHIFT			20
+
+/*
+ * Private functions
+ */
+
+/**
+ * __wrpll_calc_filter_range() - determine PLL loop filter bandwidth
+ * @post_divr_freq: input clock rate after the R divider
+ *
+ * Select the value to be presented to the PLL RANGE input signals, based
+ * on the input clock frequency after the post-R-divider @post_divr_freq.
+ * This code follows the recommendations in the PLL datasheet for filter
+ * range selection.
+ *
+ * Return: The RANGE value to be presented to the PLL configuration inputs,
+ *         or -1 upon error.
+ */
+static int __wrpll_calc_filter_range(unsigned long post_divr_freq)
+{
+	u8 range;
+
+	if (post_divr_freq < MIN_POST_DIVR_FREQ ||
+	    post_divr_freq > MAX_POST_DIVR_FREQ) {
+		WARN(1, "%s: post-divider reference freq out of range: %lu",
+		     __func__, post_divr_freq);
+		return -1;
+	}
+
+	if (post_divr_freq < 11000000)
+		range = 1;
+	else if (post_divr_freq < 18000000)
+		range = 2;
+	else if (post_divr_freq < 30000000)
+		range = 3;
+	else if (post_divr_freq < 50000000)
+		range = 4;
+	else if (post_divr_freq < 80000000)
+		range = 5;
+	else if (post_divr_freq < 130000000)
+		range = 6;
+	else
+		range = 7;
+
+	return range;
+}
+
+/**
+ * __wrpll_calc_fbdiv() - return feedback fixed divide value
+ * @c: ptr to a struct analogbits_wrpll_cfg record to read from
+ *
+ * The internal feedback path includes a fixed by-two divider; the
+ * external feedback path does not.  Return the appropriate divider
+ * value (2 or 1) depending on whether internal or external feedback
+ * is enabled.  This code doesn't test for invalid configurations
+ * (e.g. both or neither of WRPLL_FLAGS_*_FEEDBACK are set); it relies
+ * on the caller to do so.
+ *
+ * Context: Any context.  Caller must protect the memory pointed to by
+ *          @c from simultaneous modification.
+ *
+ * Return: 2 if internal feedback is enabled or 1 if external feedback
+ *         is enabled.
+ */
+static u8 __wrpll_calc_fbdiv(struct analogbits_wrpll_cfg *c)
+{
+	return (c->flags & WRPLL_FLAGS_INT_FEEDBACK_MASK) ? 2 : 1;
+}
+
+/**
+ * __wrpll_calc_divq() - determine DIVQ based on target PLL output clock rate
+ * @target_rate: target PLL output clock rate
+ * @vco_rate: pointer to a u64 to store the computed VCO rate into
+ *
+ * Determine a reasonable value for the PLL Q post-divider, based on the
+ * target output rate @target_rate for the PLL.  Along with returning the
+ * computed Q divider value as the return value, this function stores the
+ * desired target VCO rate into the variable pointed to by @vco_rate.
+ *
+ * Context: Any context.  Caller must protect the memory pointed to by
+ *          @vco_rate from simultaneous access or modification.
+ *
+ * Return: a positive integer DIVQ value to be programmed into the hardware
+ *         upon success, or 0 upon error (since 0 is an invalid DIVQ value)
+ */
+static u8 __wrpll_calc_divq(u32 target_rate, u64 *vco_rate)
+{
+	u64 s;
+	u8 divq = 0;
+
+	if (!vco_rate) {
+		WARN_ON(1);
+		goto wcd_out;
+	}
+
+	s = div_u64(MAX_VCO_FREQ, target_rate);
+	if (s <= 1) {
+		divq = 1;
+		*vco_rate = MAX_VCO_FREQ;
+	} else if (s > MAX_DIVQ_DIVISOR) {
+		divq = ilog2(MAX_DIVQ_DIVISOR);
+		*vco_rate = MIN_VCO_FREQ;
+	} else {
+		divq = ilog2(s);
+		*vco_rate = target_rate << divq;
+	}
+
+wcd_out:
+	return divq;
+}
+
+/**
+ * __wrpll_update_parent_rate() - update PLL data when parent rate changes
+ * @c: ptr to a struct analogbits_wrpll_cfg record to write PLL data to
+ * @parent_rate: PLL input refclk rate (pre-R-divider)
+ *
+ * Pre-compute some data used by the PLL configuration algorithm when
+ * the PLL's reference clock rate changes.  The intention is to avoid
+ * computation when the parent rate remains constant - expected to be
+ * the common case.
+ *
+ * Returns: 0 upon success or -1 if the reference clock rate is out of range.
+ */
+static int __wrpll_update_parent_rate(struct analogbits_wrpll_cfg *c,
+				      unsigned long parent_rate)
+{
+	u8 max_r_for_parent;
+
+	if (parent_rate > MAX_INPUT_FREQ || parent_rate < MIN_POST_DIVR_FREQ)
+		return -1;
+
+	c->_parent_rate = parent_rate;
+	max_r_for_parent = div_u64(parent_rate, MIN_POST_DIVR_FREQ);
+	c->_max_r = min_t(u8, MAX_DIVR_DIVISOR, max_r_for_parent);
+
+	/* Round up */
+	c->_init_r = div_u64(parent_rate + MAX_POST_DIVR_FREQ - 1,
+			     MAX_POST_DIVR_FREQ);
+
+	return 0;
+}
+
+/*
+ * Public functions
+ */
+
+/**
+ * analogbits_wrpll_configure() - compute PLL configuration for a target rate
+ * @c: ptr to a struct analogbits_wrpll_cfg record to write into
+ * @target_rate: target PLL output clock rate (post-Q-divider)
+ * @parent_rate: PLL input refclk rate (pre-R-divider)
+ *
+ * Given a pointer to a PLL context @c, a desired PLL target output
+ * rate @target_rate, and a reference clock input rate @parent_rate,
+ * compute the appropriate PLL signal configuration values.  PLL
+ * reprogramming is not glitchless, so the caller should switch any
+ * downstream logic to a different clock source or clock-gate it
+ * before presenting these values to the PLL configuration signals.
+ *
+ * The caller must pass this function a pre-initialized struct
+ * analogbits_wrpll_cfg record: either initialized to zero (with the
+ * exception of the .name and .flags fields) or read from the PLL.
+ *
+ * Context: Any context.  Caller must protect the memory pointed to by @c
+ *          from simultaneous access or modification.
+ *
+ * Return: 0 upon success; anything else upon failure.
+ */
+int analogbits_wrpll_configure_for_rate(struct analogbits_wrpll_cfg *c,
+					u32 target_rate,
+					unsigned long parent_rate)
+{
+	unsigned long ratio;
+	u64 target_vco_rate, delta, best_delta, f_pre_div, vco, vco_pre;
+	u32 best_f, f, post_divr_freq, fbcfg;
+	u8 fbdiv, divq, best_r, r;
+
+	if (!c)
+		return -1;
+
+	if (c->flags == 0) {
+		WARN(1, "%s called with uninitialized PLL config", __func__);
+		return -1;
+	}
+
+	fbcfg = WRPLL_FLAGS_INT_FEEDBACK_MASK | WRPLL_FLAGS_EXT_FEEDBACK_MASK;
+	if ((c->flags & fbcfg) == fbcfg) {
+		WARN(1, "%s called with invalid PLL config", __func__);
+		return -1;
+	}
+
+	if (c->flags == WRPLL_FLAGS_EXT_FEEDBACK_MASK) {
+		WARN(1, "%s: external feedback mode not currently supported",
+		     __func__);
+		return -1;
+	}
+
+	/* Initialize rounding data if it hasn't been initialized already */
+	if (parent_rate != c->_parent_rate) {
+		if (__wrpll_update_parent_rate(c, parent_rate)) {
+			pr_err("%s: PLL input rate is out of range\n",
+			       __func__);
+			return -1;
+		}
+	}
+
+	c->flags &= ~WRPLL_FLAGS_RESET_MASK;
+
+	/* Put the PLL into bypass if the user requests the parent clock rate */
+	if (target_rate == parent_rate) {
+		c->flags |= WRPLL_FLAGS_BYPASS_MASK;
+		return 0;
+	}
+	c->flags &= ~WRPLL_FLAGS_BYPASS_MASK;
+
+	/* Calculate the Q shift and target VCO rate */
+	divq = __wrpll_calc_divq(target_rate, &target_vco_rate);
+	if (divq == 0)
+		return -1;
+	c->divq = divq;
+
+	/* Precalculate the pre-Q divider target ratio */
+	ratio = div64_u64((target_vco_rate << ROUND_SHIFT), parent_rate);
+
+	fbdiv = __wrpll_calc_fbdiv(c);
+	best_r = 0;
+	best_f = 0;
+	best_delta = MAX_VCO_FREQ;
+
+	/*
+	 * Consider all values for R which land within
+	 * [MIN_POST_DIVR_FREQ, MAX_POST_DIVR_FREQ]; prefer smaller R
+	 */
+	for (r = c->_init_r; r <= c->_max_r; ++r) {
+		/* What is the best F we can pick in this case? */
+		f_pre_div = ratio * r;
+		f = (f_pre_div + (1 << ROUND_SHIFT)) >> ROUND_SHIFT;
+		f >>= (fbdiv - 1);
+
+		post_divr_freq = div_u64(parent_rate, r);
+		vco_pre = fbdiv * post_divr_freq;
+		vco = vco_pre * f;
+
+		/* Ensure rounding didn't take us out of range */
+		if (vco > target_vco_rate) {
+			--f;
+			vco = vco_pre * f;
+		} else if (vco < MIN_VCO_FREQ) {
+			++f;
+			vco = vco_pre * f;
+		}
+
+		delta = abs(target_rate - vco);
+		if (delta < best_delta) {
+			best_delta = delta;
+			best_r = r;
+			best_f = f;
+		}
+	}
+
+	c->divr = best_r - 1;
+	c->divf = best_f - 1;
+
+	post_divr_freq = div_u64(parent_rate, best_r);
+
+	/* Pick the best PLL jitter filter */
+	c->range = __wrpll_calc_filter_range(post_divr_freq);
+
+	return 0;
+}
+
+/**
+ * analogbits_wrpll_calc_output_rate() - calculate the PLL's target output rate
+ * @c: ptr to a struct analogbits_wrpll_cfg record to read from
+ * @parent_rate: PLL refclk rate
+ *
+ * Given a pointer to the PLL's current input configuration @c and the
+ * PLL's input reference clock rate @parent_rate (before the R
+ * pre-divider), calculate the PLL's output clock rate (after the Q
+ * post-divider)
+ *
+ * Context: Any context.  Caller must protect the memory pointed to by @c
+ *          from simultaneous modification.
+ *
+ * Return: the PLL's output clock rate, in Hz.
+ */
+unsigned long analogbits_wrpll_calc_output_rate(struct analogbits_wrpll_cfg *c,
+						unsigned long parent_rate)
+{
+	u8 fbdiv;
+	u64 n;
+
+	WARN(c->flags & WRPLL_FLAGS_EXT_FEEDBACK_MASK,
+	     "external feedback mode not yet supported");
+
+	fbdiv = __wrpll_calc_fbdiv(c);
+	n = parent_rate * fbdiv * (c->divf + 1);
+	n = div_u64(n, (c->divr + 1));
+	n >>= c->divq;
+
+	return n;
+}
+
+/**
+ * analogbits_wrpll_calc_max_lock_us() - return the time for the PLL to lock
+ * @c: ptr to a struct analogbits_wrpll_cfg record to read from
+ *
+ * Return the minimum amount of time (in microseconds) that the caller
+ * must wait after reprogramming the PLL to ensure that it is locked
+ * to the input frequency and stable.  This is likely to depend on the DIVR
+ * value; this is under discussion with the manufacturer.
+ *
+ * Return: the minimum amount of time the caller must wait for the PLL
+ *         to lock (in microseconds)
+ */
+unsigned int analogbits_wrpll_calc_max_lock_us(struct analogbits_wrpll_cfg *c)
+{
+	return MAX_LOCK_US;
+}
diff --git a/drivers/cpu/riscv_cpu.c b/drivers/cpu/riscv_cpu.c
index 5e15df5..f77c126 100644
--- a/drivers/cpu/riscv_cpu.c
+++ b/drivers/cpu/riscv_cpu.c
@@ -10,6 +10,8 @@
 #include <dm/device-internal.h>
 #include <dm/lists.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 static int riscv_cpu_get_desc(struct udevice *dev, char *buf, int size)
 {
 	const char *isa;
@@ -62,7 +64,6 @@
 
 	/* save the hart id */
 	plat->cpu_id = dev_read_addr(dev);
-
 	/* first examine the property in current cpu node */
 	ret = dev_read_u32(dev, "timebase-frequency", &plat->timebase_freq);
 	/* if not found, then look at the parent /cpus node */
@@ -71,7 +72,7 @@
 			     &plat->timebase_freq);
 
 	/*
-	 * Bind riscv-timer driver on hart 0
+	 * Bind riscv-timer driver on boot hart.
 	 *
 	 * We only instantiate one timer device which is enough for U-Boot.
 	 * Pass the "timebase-frequency" value as the driver data for the
@@ -80,7 +81,7 @@
 	 * Return value is not checked since it's possible that the timer
 	 * driver is not included.
 	 */
-	if (!plat->cpu_id && plat->timebase_freq) {
+	if (plat->cpu_id == gd->arch.boot_hart && plat->timebase_freq) {
 		drv = lists_driver_lookup_name("riscv_timer");
 		if (!drv) {
 			debug("Cannot find the timer driver, not included?\n");
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index c9ee222..182331f 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -143,7 +143,7 @@
 
 static int macb_is_gem(struct macb_device *macb)
 {
-	return MACB_BFEXT(IDNUM, macb_readl(macb, MID)) == 0x2;
+	return MACB_BFEXT(IDNUM, macb_readl(macb, MID)) >= 0x2;
 }
 
 #ifndef cpu_is_sama5d2
@@ -1061,14 +1061,13 @@
 		return -EINVAL;
 
 	/*
-	 * Zynq clock driver didn't support for enable or disable
-	 * clock. Hence, clk_enable() didn't apply for Zynq
+	 * If clock driver didn't support enable or disable then
+	 * we get -ENOSYS from clk_enable(). To handle this, we
+	 * don't fail for ret == -ENOSYS.
 	 */
-#ifndef CONFIG_MACB_ZYNQ
 	ret = clk_enable(&clk);
-	if (ret)
+	if (ret && ret != -ENOSYS)
 		return ret;
-#endif
 
 	clk_rate = clk_get_rate(&clk);
 	if (!clk_rate)
diff --git a/drivers/serial/serial_sifive.c b/drivers/serial/serial_sifive.c
index 341728a..537bc7a 100644
--- a/drivers/serial/serial_sifive.c
+++ b/drivers/serial/serial_sifive.c
@@ -33,16 +33,40 @@
 };
 
 struct sifive_uart_platdata {
-	unsigned int clock;
+	unsigned long clock;
 	int saved_input_char;
 	struct uart_sifive *regs;
 };
 
+/**
+ * Find minimum divisor divides in_freq to max_target_hz;
+ * Based on uart driver n SiFive FSBL.
+ *
+ * f_baud = f_in / (div + 1) => div = (f_in / f_baud) - 1
+ * The nearest integer solution requires rounding up as to not exceed
+ * max_target_hz.
+ * div  = ceil(f_in / f_baud) - 1
+ *	= floor((f_in - 1 + f_baud) / f_baud) - 1
+ * This should not overflow as long as (f_in - 1 + f_baud) does not exceed
+ * 2^32 - 1, which is unlikely since we represent frequencies in kHz.
+ */
+static inline unsigned int uart_min_clk_divisor(unsigned long in_freq,
+						unsigned long max_target_hz)
+{
+	unsigned long quotient =
+			(in_freq + max_target_hz - 1) / (max_target_hz);
+	/* Avoid underflow */
+	if (quotient == 0)
+		return 0;
+	else
+		return quotient - 1;
+}
+
 /* Set up the baud rate in gd struct */
 static void _sifive_serial_setbrg(struct uart_sifive *regs,
 				  unsigned long clock, unsigned long baud)
 {
-	writel((u32)((clock / baud) - 1), &regs->div);
+	writel((uart_min_clk_divisor(clock, baud)), &regs->div);
 }
 
 static void _sifive_serial_init(struct uart_sifive *regs)
@@ -75,27 +99,27 @@
 
 static int sifive_serial_setbrg(struct udevice *dev, int baudrate)
 {
-	int err;
+	int ret;
 	struct clk clk;
 	struct sifive_uart_platdata *platdata = dev_get_platdata(dev);
+	u32 clock = 0;
 
-	err = clk_get_by_index(dev, 0, &clk);
-	if (!err) {
-		err = clk_get_rate(&clk);
-		if (!IS_ERR_VALUE(err))
-			platdata->clock = err;
-	} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (IS_ERR_VALUE(ret)) {
 		debug("SiFive UART failed to get clock\n");
-		return err;
+		ret = dev_read_u32(dev, "clock-frequency", &clock);
+		if (IS_ERR_VALUE(ret)) {
+			debug("SiFive UART clock not defined\n");
+			return 0;
+		}
+	} else {
+		clock = clk_get_rate(&clk);
+		if (IS_ERR_VALUE(clock)) {
+			debug("SiFive UART clock get rate failed\n");
+			return 0;
+		}
 	}
-
-	if (!platdata->clock)
-		platdata->clock = dev_read_u32_default(dev, "clock-frequency", 0);
-	if (!platdata->clock) {
-		debug("SiFive UART clock not defined\n");
-		return -EINVAL;
-	}
-
+	platdata->clock = clock;
 	_sifive_serial_setbrg(platdata->regs, platdata->clock, baudrate);
 
 	return 0;
diff --git a/include/configs/sifive-fu540.h b/include/configs/sifive-fu540.h
new file mode 100644
index 0000000..7007b5f
--- /dev/null
+++ b/include/configs/sifive-fu540.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ *   Anup Patel <anup.patel@wdc.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_2M)
+
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_2M)
+
+#define CONFIG_SYS_MALLOC_LEN		SZ_8M
+
+#define CONFIG_SYS_BOOTM_LEN		SZ_16M
+
+#define CONFIG_STANDALONE_LOAD_ADDR	0x80200000
+
+/* Environment options */
+#define CONFIG_ENV_SIZE			SZ_4K
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"fdt_high=0xffffffffffffffff\0" \
+	"initrd_high=0xffffffffffffffff\0" \
+	"kernel_addr_r=0x80600000\0" \
+	"fdt_addr_r=0x82200000\0" \
+	"scriptaddr=0x82300000\0" \
+	"pxefile_addr_r=0x82400000\0" \
+	"ramdisk_addr_r=0x82500000\0" \
+	BOOTENV
+
+#endif /* __CONFIG_H */
diff --git a/include/dt-bindings/clk/sifive-fu540-prci.h b/include/dt-bindings/clk/sifive-fu540-prci.h
new file mode 100644
index 0000000..531523e
--- /dev/null
+++ b/include/dt-bindings/clk/sifive-fu540-prci.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Copyright (C) 2018 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SIFIVE_FU540_PRCI_H
+#define __LINUX_CLK_SIFIVE_FU540_PRCI_H
+
+/* Clock indexes for use by Device Tree data */
+
+#define PRCI_CLK_COREPLL		0
+#define PRCI_CLK_DDRPLL			1
+#define PRCI_CLK_GEMGXLPLL		2
+#define PRCI_CLK_TLCLK			3
+
+#endif
diff --git a/test/dm/clk.c b/test/dm/clk.c
index 898c034..112d5cb 100644
--- a/test/dm/clk.c
+++ b/test/dm/clk.c
@@ -12,12 +12,15 @@
 
 static int dm_test_clk(struct unit_test_state *uts)
 {
-	struct udevice *dev_fixed, *dev_clk, *dev_test;
+	struct udevice *dev_fixed, *dev_fixed_factor, *dev_clk, *dev_test;
 	ulong rate;
 
 	ut_assertok(uclass_get_device_by_name(UCLASS_CLK, "clk-fixed",
 					      &dev_fixed));
 
+	ut_assertok(uclass_get_device_by_name(UCLASS_CLK, "clk-fixed-factor",
+					      &dev_fixed_factor));
+
 	ut_assertok(uclass_get_device_by_name(UCLASS_CLK, "clk-sbox",
 					      &dev_clk));
 	ut_asserteq(0, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_SPI));